How to Calculate Running Pace (Minutes per km or Mile)

Work out your running pace from distance and time, convert between km and mile pace, find finish times, and convert pace to speed.

Pace is how long it takes you to cover a set distance, usually written as minutes per kilometer or minutes per mile. Runners use it to plan training and race targets because it is easier to judge in the moment than speed.

Our running pace calculator works out pace, finish time or distance, in kilometers and miles.

Try the Running Pace Calculator. Pace, finish time or distance for runs and races

Open the calculator

The pace formula

Pace = time ÷ distance

Example: a 5K in 27 minutes 30 seconds

  1. Convert time to minutes: 27 min 30 s = 27.5 minutes.
  2. Divide by distance: 27.5 ÷ 5 = 5.5 minutes per km.
  3. Convert the decimal back to seconds: 0.5 × 60 = 30 seconds.

Pace = 5:30 per km.

Converting decimals to minutes and seconds

Pace often comes out as a decimal. Multiply the part after the decimal point by 60 to get seconds:

  • 6.25 minutes = 6 minutes + 0.25 × 60 seconds = 6:15
  • 4.8 minutes = 4 minutes + 0.8 × 60 seconds = 4:48
Advertisement

Kilometers and miles

One mile is 1.609344 kilometers.

Pace per mile = pace per km × 1.609344
Pace per km = pace per mile ÷ 1.609344
Pace per km Pace per mile
4:00 6:26
4:30 7:15
5:00 8:03
5:30 8:51
6:00 9:39
6:30 10:28
7:00 11:16

Finding a finish time from a pace

Time = pace × distance

At 5:30 per km (5.5 minutes):

Race Distance Finish time
5K 5 km 27:30
10K 10 km 55:00
Half marathon 21.0975 km 1:56:02
Marathon 42.195 km 3:52:04

Few runners can hold the same pace from 5K to a marathon, so treat longer race times as the best case at that pace.

Finding distance from time and pace

Distance = time ÷ pace

A 45-minute run at 6:00 per km covers 45 ÷ 6 = 7.5 km.

Pace and speed

Speed is the opposite of pace: distance per unit of time.

Speed (km/h) = 60 ÷ pace (minutes per km)
  • 5:00 per km = 60 ÷ 5 = 12 km/h
  • 6:00 per km = 60 ÷ 6 = 10 km/h

Treadmills usually display speed, so this conversion is useful when you know your target pace. To get mph, divide km/h by 1.609344.

Splits

Splits are your times for each kilometer or mile of a run. For an even 10K at 5:30 per km, your elapsed time should be 5:30 at 1 km, 11:00 at 2 km, 16:30 at 3 km, and so on. Checking splits during a race tells you whether you are on target.

Many experienced runners aim for even splits or slightly faster second halves. Our guide to negative split pacing explains why.

A note on GPS accuracy

Running watches estimate distance from GPS, which can be off by a small percentage, especially around tall buildings, under trees or on tight bends. Official race courses are measured precisely, so your watch may show a slightly longer or shorter distance than the race.

This guide is general information, not medical advice. Talk to a doctor, midwife or registered dietitian about your own situation.